Well I finally did it. I got half of the bus on the ground   I took advantage of the Memorial Day holiday to work on the front end. 2 years ago I started in on the suspension for the bus with the intent on bringing it down out of the clouds, and putting some BRM's on it. Well, I got the beam (5 inches narrower), and some dropped spindles, but I just didn't have the motivation to get it all done. Today, I got most of the job done! I needed to move the bus from the old garage, over to the new house, and a bus with no wheels is a hard thing to move. I really didn't get the whole job done, but enough to make the poor thing mobile again. And I have the pics to prove it -